TIMS 13th Symposium – Denmark 2011

Programme – a short presentation

Mills, which we will see during the symposium

 

 Saturday the 3rd September 2011

15.00-18.00: Arrival of participants, accommodation and registration at Quality Hotel Aalborg (part of Aalborg Congress Centre)
18.45: Departure for Lindholm Høje Museum
19.00: Welcome reception and social intercourse among wikings.

 

Sunday the 4th September 2011

From 7.30: Breakfast
9.30: Opening of the Symposium
10.30–12.30: Paper session: The correct preservation of mills - with a short coffee/ tea break (during all sessions you will find water, coffee and some fruit in the corridor).
12.30: Lunch
13.30-15.30: Paper session: The correct preservation of mills
15.30-16.00: Coffee /tea break
16.00-18.00: Round Table discussion including oral presentations: Practical problems connected with restoring of mills and how they are best overcome.
18.30: Dinner
20.30- ? Short contributions

 

 

 

 

 

 

 

 

 

 

 Monday the 5th September 2011

From 6.30: Breakfast
9.30-12.30: Paper session: Molinology in general - with a short coffee /tea break

Parallel excursions:

Group number 1:

12.30: Lunch
13.30 – 21.30: Departure for mill excursion to Vendsyssel - north of the Limfjord. Dinner at the inn in Hjallerup.

Group number 2:

12.30 – 22.15: Departure for mill excursion to Himmerland - south of the Limfjord
We bring along lunch-packets, which we will have at the first mill (about 13.00). Dinner at the inn Færgekroen in Hadsund.

 

Tuesday the 6th September 2011

From 6.30: Breakfast
9.30-12.30: Paper session: Molinology in general with a short coffee /tea break

Parallel excursions:

Group number 1:

12.30–22.15: Departure for mill excursion to Himmerland - south of the Limfjord. 
We bring along lunch-packets, which we will have at the first mill (about 13.00). Dinner at the inn Færgekroen in Hadsund.

Group number 2:

12.30–13.30: Lunch
13.30–21.30: Mill excursion to Vendsyssel - north of the Limfjord. Dinner at the inn in Hjallerup.

 

Wednesday 7th September 2011

From 6.30: Breakfast
9.30-12.30: Paper session: Molinology in general - with a short coffee /tea break
12.30: Lunch
14.00: General meeting of TIMS members
  After the meeting you will have some time for a walk in the town or to continue the disussion in more informal ways .
18.30: Dinner
20.30 - ?: Short contributions

 

Thursdays 8th September 2011

From 6.30: Breakfast
9.30 – 12.30: Mini symposium:  Danish millwrighting under foreign influence – with invited guest speakers.
12.30: Lunch
12.30-15.30: Mini symposium:  Danish millwrighting under foreign influence – with invited guest speakers.
15.30 – 16.00: Coffee/ tea break
16.00 – 18.00: Mini symposium:  Danish millwrighting under foreign influence – with invited guest speakers.
18.30: Dinner
20.30 - ?: Short contributions

 

Friday 9th September 2011

6.30: Breakfast
7.30: Departure for Seeland
11.45–13.15: Visit at the workshop Møllebygger John Jensen Aps and lunch. Host: millwright Michael Jensen.
14.00–15.00: Tadre Watermill
15.45–16.45: Ringsted Windmill
18.00-19.00: Lille Mølle (once owned by Anders Jespersen)
20.00: Arrival at Christiansminde in Svendborg and dinner

 

Saturday 10th September 2011

From 7.00: Breakfast
8.30: Departure for mill excursion on southern Fyn.
9.00-9.45: Ulbølle Windmill
10.00-11.00 Rødkilde Watermill
11.45-14.15: Grubbe Mill (water- and windmill), lunch. Host: Dansk Møllerforening (The Danish Millers Association).
14.30-15.30: Kaleko watermill
16.30-17.30 Ventepose  watermill
20.00: Farewell dinner at Christiansminde in Svendborg

 

Sunday 11th September 2011

From 7.00: Breakfast
8.30: Departure for post tour
9.00: Departure coach for Nyborg and Copenhagen Airport

 

 



Post Symposium Tour 11th – 14th September  -  “Mills in the Danish-German borderland”

The post-Symposium tour brought us to southern Jutland – once a duchy under the Danish king, from 1864 it was under German rule, and then once again united with Denmark in 1920. This history has, of course, influenced the development of the mills. On one day we visited Mandø in the Danish Wadden Sea. Mandø is an island which is reachable only during low tide. The island has only 62 inhabitants, but they have one of the smallest windmills in Denmark with machinery for making pearl barley. As a contrast we also visited the highest Danish windmill which is in Højer.

 

The following Papers and Presentations were given:

Jesper Herbert Nielsen: Preservation of mills - is it possible at all?- even in a museum?

Heinz Schuler: Better than the original (mill preservation in Switzerland)

Nazar Lavrinenko: Unique windmills of the Kaniv region, Ukraine

Stylianos Mouzakis: Time-space subjects and configurates, the capability of mill restoration in Greece

Gábor Dániel Ozsváth: The preservation of Hungarian windmills

Katsunobu Kosaka: The repair and preservation of wooden watermills in Japan

Christel Pagel: Practical problems connected with restoring of mills and how they are best overcome

Theresa Bergmann: How I experienced the restoration (Retz windmill, Austria)

Tony Bonson: The peculiar millstones of Mow Cop

Michel Lajoie-Mazenc: When mills were driven by a hydraulic tourniquet

Ton Meesters: Postmill typology of Ukraine

Paul Groen: Restorating the brakewheel of windmill ”Kyck over den Dyck”, Dordrecht (Netherlands)

Stefanos Nomikos & Olga Lekou: Projects for the restoration of two ruined windmills (Greece)

Ondrej Merta: Water Mill in Slup, a virtue of necessity, or a unique museum of milling?(Czech Republic)

Florin Streza: The Collection of fulling-mills and whirlpools from the ”Astra Museum” (Romania)

Ansgar Rahmacher: Mill GPS databases

Holly Parton and Stephen McPhillips: The Disappearing Art of the Vertical Watermill in the Middle East: a Rare Survival in the Upper Orontes Valley, Syria

Konstantinos Toumpakaris: The typical watermill of Naxos Island

Christian Fischer: Two Early Danish Watermills

Lise Andersen: Danish millwrighting under foreign influences. 16th – 18th century

Ernst Linow: The development of village mills in Sønderjylland / Slesvig from 1864

Povl Otto Nissen: The story of the reduction in the number of mill sails

Ana Claudi Silveira: The Project “Tidemills of Western Europe”

David Plunkett: Latest Tidemills Reseach

Andre Koopal: Wikipedia/Wikimedia - a way to share knowledge about mills

David Hayes: The wind powered Cane mill of St. Croix West Indies 1750-1830

John Boucher: The Windmills of Alexandria – an update

Lindsay Baker: Wind Engines in the United States and Canada

Robbert and Sytske Verkerk: Les moulin turquois

Mihkel Koppel: The minimum postmill

Tony Bonson: The struggle for water supply to the mills

Ana Cláudia Silveira: Recent developments in water law: a threat for mills?

Constance Berman: The preservation of records for late twelfth and early thirteenth century windmills in France

David H. Jones: Mills of Mediaeval Paris and the St. Denys Manuscript

Herman Peel: From oak wooden wind shafts to cast iron Poll-ends in Flanders

Ton Meesters: The Spread of Self-Regulating Sails in the Low Countries

Yasuyuki Nemoto, Michiko Maruyama and Izumi Ushiyama: Development of a micro hydro turbine based on traditional water wheels in Ashikaga region

Eric Stoop: The use of iron in windmills A comparison between English and Dutch mills

Kenjiro Kawakami: The Japanese small-mills

Euphrosyne Rizopolou-Egoumenidou: The corn-grinding mills of Karpasia, Cyprus

Jean-Yves Dufor: Excavation of the windmill and the millers’ house at Roissy-en-France (Val-d’Oise, France)

Yasuyuki Nemoto, Hironori Yoshida and Izumi Ushiyama: Performance investigation of Japanese traditional paddle wheels

Mariendalsmøllen: In 1757-60 a windmill was built at the outskirts of Aalborg as supplement for 3 watermills in the city. In 1893 it was replaced by a bigger and more modern Dutch windmill. The mill contains millwork, gears etc., but unfortunately it is only used as a landmark.

Øster Sundby windmill: Moved from Ravnstrup to the present place in 1910, after the old mill burned down. Dutch mill with original springsails. In daily use until 1967.

Vodskov windmill was first built in 1882. It burned down in 1910, and was replaced by the present mill, which was moved from Flamsted. Despite the mill’s small size it has a lot of machinery (the owner was a millwright).

Dorf water- and windmill: The watermill is first mentioned in the 17th century. In 1877 the windmill was build as supplement in times of drought or frost. About 1920 the waterwheel was replaced by a Francis turbine, and the watermill was turned into a power plant that supplied the farm with electricity.

Godthåb hammer mill: Originally a paper mill, which in 1858 was rebuilt as a hammer mill. In 1868 the Poncelet waterwheel was replaced by a Francis turbine. The waterwheel is exhibited outside the mill. Inside is a rich maschinery, which is still working now and then.

Hjerritsdal watermill: First mentioned in the 15th century. In its present shape it is from 1832. It has an interior overshot waterwheel and under drive (the spurwheel beneath the stones), which is typical for North Jutland. It is situated in a marvellous landscape.

Havnø windmill: Small Dutch mill built in 1842 with the original machinery for grinding rye and pearled barley. In the 19th century it produced pearled barley for export to Norway.

The exhibition: Danish Millwrighting through the ages at Nordjyllands Historiske Museum, Hadsund. An exhibition arranged by curator Lise Andersen.

Møllebygger John Jensen Aps, millwright workshop. The workshop was founded 1882. From 1978 till his death in 2008, the owner was the well known Danish millwright John Jensen. His son Michael Jensen continues his father’s work.

Tadre watermill: First mentioned in 1405. In its present shape it is built about 1840. It has an overshot waterwheel and over drive (spurwheel over the stones), which is typical for Seeland.

Ringsted windmill: Excellent Dutch windmill from 1872, with a very rich machinery. It was in daily use until 1965. Fully restored in 1886. Today they produce organic flour.

Lille Mølle: Watermill with two overshot wheels. The mill was once owned by the molinologist Anders Jespersen, who made a lot of molinological experiments with his Lille Mølle (the name means Little Mill).

Ulbølle windmill is built 1863 as a brick laid windmill with reefing stage. One of only 3 Danish mills with iron sails stocks. Remark the yellow color of the sails stocks, which is typical for southern Fyn. . In daily use until 1970.

Rødkilde watermill once was a hair powder mill, built in 1754. Later rebuild for grinding cereals. It has the biggest overshot wheel in Denmark (5,65 m). In 1994 it was restored by millwright John Jensen. The restoration was given the Europa Nostra award for well executed restoration and handicraft.

Grubbe Mill (water- and windmill). The watermill is first mentioned in 1599 but has been rebuilt many times. The windmill was moved from Nykøbing on Seeland in 1892. The windmill was seriously damaged in a gale in 1999, but is fully restored.

Kaleko watermillis the oldest preserved watermill in Denmark. It is probably from the time of king Valdemar Atterdags (1340-1375). Originally it had undershot wheels, but in the 17th century it got 2 overshot wheels. The mill was opened as museum in 1917.

Ventepose watermill is one of Denmark’s three oldest watermills, built in the 17th century. It was in use until 1934. Built on the shore of the island Tåsinge. The farmers came by boat with their corn.

DK2011 Invitation

More than 40 years had past since TIMS last visited Denmark for the Second Symposium in 1969, and we were happy to invite our members to come once more to – not just the native country of the vikings and the fairy-tale writer Hans Christian  Andersen – but also that of Poul la Cour and Anders Jespersen.

The Denmark Rødkilde Fyn 13th Symposium took place in Aalborg, Denmark, from the evening of Saturday the 3rd September to Sunday the 11th September, 2011. We offered a varied program of lectures and visits to mills, comfortable conference facilities connected to the hotel and a partner program with sponcered admission to museums, free guided tour of old Aalborg and a bustrip to Skagen, the northern point of Denmark where to seas meet.

Aalborg is easy to reach whether you arrive by train, bus or plane, and the conference center is situated close the old town center.

Together with the IM all members received a “call for papers”, but we indicated that we particularly would appreciate contributions on the subject “the correct preservation of mills”, as we hoped to have a prolific discussion about the principles and the practice of preservation.

One day was reserved for presentations from invited guests who lectured on the subject “Foreign Influences on Danish millwrighting”. The construction of mills in Denmark since the middle ages had been strongly influenced by developments from other European countries, firstly from medieval England, then the renaissance HDK2010 logoolland, Friesland and Holstein, and in the later years again from England, Germany, France and USA.

We offered pre-tour to the paradise of mills, Bornholm and Skåne (in southern Sweden), with departure from Copenhagen on 30th August, and post-tour to Southern Denmark. The post-tour finished in Copenhagen 14th September, 2011.

We tried to offer a number of places at a reduced price, which would be granted after application from students, and members from soft-currency countries under the condition that the applicant contributed a paper to the Symposium.

The logo for the Symposium was drawn by Mogens Pedersen, Denmark, and is inspired by a papercut  made by the fairy tale writer Hans Christian Andersen.

The 13th TIMS Symposium in Aalborg, Denmark.

The SYMPOSIUM DK2011 took place from Saturday, 3rd September till Sunday, 11th September.

The PRE-TOUR was held from the 30th of August till 3rd September. It went to the paradise of mills, Bornholm and Skåne (in southern Sweden).

The POST-TOUR was held from 11th September till 14th September, and went to southern Denmark.

 

TIMS Symposium 2019 "Open Day"

18th of August 2019 10:00 - 18:00

As part of the 15th International Symposium on Molinology our "open day of presentations" was held

Theme: "Mills in History and Archeology".

Scientists presented five exciting research projects and inspired the participants with interesting pictures and films.

The presentations were translated simultaneously (engl / dt or dt / engl).

Mill associations introduced themselves and presented their work.The DGM (German Mills and Mills Conservation Society) informed about current projects.There were books on sale (from private to private).The publisher Moritz Schäfer presented his book projects.

program

From 09:00 ...
Inlet
- Meeting point TIMS
- Poster and video presentations, small exhibition

10: 00-10: 30
Opening / Greeting

10: 30-11: 15
"The reconstruction of a medieval watermill at Guedelon"
Johan De Punt, millwright (Belgium)
Watermill at Guedelon

11: 15-11: 45
Coffee break

 

11: 45-12: 30
"The Mill Cascade of Ephesus" A technical monument of late antique-early Byzantine city.
Dr.Stefanie Wefers, archaeologist, Mainz


Mill at Ephesus

12: 30-14: 00
Lunch break (URANIA catering service on site)
Meeting point TIMS / Meeting point DGM / Poster presentations
Exhibition / book sales

14: 00-14: 45
"Konrad Gruter of Werden: De machinis et rebus machanicis"
Professor Dietrich Lohrmann, University of Aachen (D)


windmill

15: 00-15: 45
"Water and Windmills in Europe in Late Antiquity and the Middle Ages."
Professor Ing. Andreas Ney, University of Applied Sciences Dortmund (D)

15: 45-16: 15
Coffee break

16: 15-17: 00
"Technical and Archaeological Studies of Persian Windmills and their Millstones"
Dr. Muslim Mishmastnehi (Iran)
Horizontal windmill

17:00 o'clock
Closing / thanksgiving

around 18:30 clock end of the event

 

DE2019 Invitation

Logo DE2019

The Symposium took place from the 17th to 25th of August 2019. The theme of the Symposium was “Mills in history and archaeology”.

MapIn addition there was the opportunity to participate in a 4-5 days pre-tour to the south-east of Germany (Saxony), as well as in a 7 days post-tour to the middle of Germany (Hannover). 
As part of the Symposium a visit was organized to the mills in Berlin and Brandenburg and to important museums at Berlin.

The venue of the Symposium

In 2019 the Symposium took place in the city-centre of Berlin.
The paper sessions and presentations were held in the conference centre of the hotel.

Call for Papers

We called on all TIMS members and others (*1) to present their molinological research as a formal paper and/or as an informal, short contribution. Papers on all molinological topics were welcome.

Our theme was:  “Mills in history and archaeology”, so papers on this topic were appreciated.

The deadline for submission was the 1st of April 2019.  Please read and follow the “Formal Paper instructions”, which can be found here.

Formal papers

The symposium participants got the possibility to download the papers in advance and were expected to have read the papers; therefore, authors received only 20 minutes for presenting a summary of their paper and 10 minutes for engaging in discussion with the audience.

Key presentation/papers

UraniaAt the Berlin2019 Symposium wehaf an “Open to the public presentation day” with 5 key speakers giving a presentation to large audience (200 +).  On our first day of the Symposium, 18th Aug. 2019, we used the URANIA (*2)  for one day “Public day of Molinology”. These presentations aimed to attract large audience from all over Germany, to make contact to existing and new members and to make the public aware of how important it is to save mills of any kind as significant technical/historical monuments.

This event was sponsored by various mill organisations.

 

 

 

Informal Presentations

For informal contributions we expected in advance detailed information (paper or presentation file) on the subject. The time required to present the informal paper: maximum 20 minutes including discussion. Deadline for submission was the 1st April 2019.